Гаражный подъёмник гидравлический грузоподъемный стол с заводской ценой
Описание продукта
Model |
Capacity (KG) |
Table Size (mm) |
Min.Height (mm) |
Lift Stroke (mm) |
Max. Height (mm) |
Power (KW) |
HTJG1-2.2 |
1000 |
1500*1000 |
400 |
2200 |
2600 |
2.2 |
HTJG2-1.9 |
2000 |
1600*1200 |
480 |
1900 |
2380 |
3 |
HTJG3-1.8 |
3000 |
1500*1500 |
520 |
1800 |
2300 |
4 |
HTJG3-2.3 |
3000 |
2000*1800 |
550 |
2300 |
2850 |
4 |
HTJG10-4 |
10000 |
3500*3000 |
1100 |
4000 |
5100 |
7.5 |
All the load capacity, lifting height, platform size can be customized according to your request! |
Product Maintenance |
Parts |
Maintenance Time |
Remark |
Check the intermediate shaft and bearing, cylinder pin and bearing, lubrication boom hinge shaft and bearing. |
Butter |
Every month |
Add butter into the parts to ensure lubrication between the bearings. (refer to drawing 1) |
Replace hydraulic oil |
32 # anti-wear hydraulic oil |
2-6 months |
First replacement in 2 months, then every 6 months to replace (high frequency 3 months). When hydraulic oil dark, oil sticky, or oil dirty, the hydraulic oil should be replaced. (refer to drawing 2) |
Check the hydraulic pipes and pipe joints |
|
1 year |
The pipeline is damaged should be replaced immediately, the connection part is loose, tighten the pipe connector. (refer to drawing 3) |
Clean drop valve |
Valve core position |
1 year |
Remove and open the drop valve, after cleaning the valve by compressed air blow gun, re-install the drop valve. (refer to drawing 4) |
Clean oil filter |
|
1 year |
Pour oil from the hydraulic oil tank, remove the tank, open and wash oil filter, then put it back to the tank. Refill with new oil in the tank. (refer to drawing 5) |
Группа Продуктов : платформа для авиационных работ > Стационарный ножничный подъемник
Premium Related Products